Civil Engineering Gate Yearwise
Civil Gate 2025 Set-2
Civil Gate 2024 Set-1
Civil Gate 2024 Set-2
Civil Gate 2023 Set-1
Civil Gate 2023 Set-2
Civil Gate 2022 Set-1
Civil Gate 2022 Set-2
Civil Gate 2021 Set-1
Civil Gate 2021 Set-2
Civil Gate 2020 Set-1
Civil Gate 2020 Set-2
Civil Gate 2019 Set-1
Civil Gate 2019 Set-2
Civil Gate 2018 Set-1
Civil Gate 2018 Set-2
Civil Gate 2017 Set-1
Civil Gate 2017 Set-2
Civil Gate 2016 Set-1
Civil Gate 2016 Set-2
Civil Gate 2015 Set-1
Civil Gate 2015 Set-2
Civil Gate 2014 Set-1
Civil Gate 2014 Set-2
Civil Gate 2013
Civil Engineering GATE 2014 Set-2 Questions with Answer
Ques 1 Construction Materials and Management
Group I contains representative stress-strain curves as shown in the figure, while Group II gives the list of materials. Match the stress-strain curves with the corresponding materials.
Group I
P. Curve J
Q. Curve K
R. Curve L
Group II
1. Cement paste
2. Coarse aggregate
3. Concrete
Ques 2 Construction Materials and Management
The target mean strength fcm for concrete mix design obtained from the characteristic strength fck and standard deviation σ, as defined in IS:456-2000, is
Ques 3 Construction Materials and Management
The flexural tensile strength of M25 grade of concrete, in N/mm2, as per IS:456-2000 is ______.
3.5 is the correct answer.
Ques 4 Construction Materials and Management
The modulus of elasticity, E = 5000√fck where fck is the characteristic compressive strength of concrete, specified in IS:456-2000 is based on
Ques 5 Engineering Mathematics
A fair (unbiased) coin was tossed four times in succession and resulted in the following outcomes: (i) Head, (ii) Head, (iii) Head, (iv) Head. The probability of obtaining a ‘Tail’ when the coin is tossed again is
Ques 6 Engineering Mathematics
The determinant of matrix [0 1 2 3; 1 0 3 0; 2 3 0 1; 3 0 1 2] is ______.
88 is the correct answer.
Ques 7 Engineering Mathematics
z = (2 - 3i) / (-5 + i) can be expressed as
Ques 8 Engineering Mathematics
The integrating factor for the differential equation dP/dt + k1P = k1Loe-k1t is
Ques 9 Engineering Mathematics
If {x} is a continuous, real valued random variable defined over the interval (-∞,+∞) and its probability density function is given by f(x) = (1 / √(2π) * b)e-(x-a)2 / 2b2 where 'a' and 'b' are the constants. The value of the integral ∫-∞a (1 / √(2π) * b)e-(x-a)2 / 2b2 dx is
Ques 10 Engineering Mathematics
Polar moment of inertia (Ip), in cm4, of a rectangular section having width, b = 2 cm and depth, d = 6 cm is ______.
40 is the correct answer.
Ques 11 Engineering Mathematics
The expression limα→0 ((xα - 1) / α) is equal to
Ques 12 Engineering Mathematics
An observer counts 240 veh/h at a specific highway location. Assume that the vehicle arrival at the location is Poisson distributed, the probability of having one vehicle arriving over a 30-second time interval is ______.
0.25 to 0.28 is the correct answer.
Ques 13 Engineering Mathematics
The rank of the matrix [6 0 4 4; -2 14 8 18; 14 -14 0 -10] is ______.
2 is the correct answer.

Total Unique Visitors