Civil Engineering Gate Yearwise
Civil Gate 2025 Set-2
Civil Gate 2024 Set-1
Civil Gate 2024 Set-2
Civil Gate 2023 Set-1
Civil Gate 2023 Set-2
Civil Gate 2022 Set-1
Civil Gate 2022 Set-2
Civil Gate 2021 Set-1
Civil Gate 2021 Set-2
Civil Gate 2020 Set-1
Civil Gate 2020 Set-2
Civil Gate 2019 Set-1
Civil Gate 2019 Set-2
Civil Gate 2018 Set-1
Civil Gate 2018 Set-2
Civil Gate 2017 Set-1
Civil Gate 2017 Set-2
Civil Gate 2016 Set-1
Civil Gate 2016 Set-2
Civil Gate 2015 Set-1
Civil Gate 2015 Set-2
Civil Gate 2014 Set-1
Civil Gate 2014 Set-2
Civil Gate 2013
Civil Engineering GATE 2016 Set-1 Questions with Answer
Ques 1 Civil Engineering Materials
Bull's trench kiln is used in the manufacturing of
Ques 2 Civil Engineering Materials
The compound which is largely responsible for initial setting and early strength gain of Ordinary Portland Cement is
Ques 3 Engineering Mathematics
Newton-Raphson method is to be used to find root of equation 3x-ex+sin x=0. If the initial trial value for the root is taken as 0.333, the next approximation for the root would be ___________ (note: answer up to three decimal)
0.360 is the correct answer.
Ques 4 Engineering Mathematics
The type of partial differential equation ∂2p/∂x2+∂2p/∂y2+3∂2p/∂x∂y+2∂P/∂x-∂P/∂y=0 is
Ques 5 Engineering Mathematics
If the entries in each column of a square matrix M add up to 1, then an eigenvalue of M is
Ques 6 Engineering Mathematics
Type II error in hypothesis testing is
Ques 7 Engineering Mathematics
The solution of the partial differential equation ∂u/∂t=α∂2u/∂x2 is of the form
Ques 8 Engineering Mathematics
Probability density function of a random variable X is given below
is
Ques 9 Engineering Mathematics
The value of
is
Ques 10 Engineering Mathematics
The area of the region bounded by the parabola y=x2+1 and the straight line x+y=3 is
Ques 11 Engineering Mathematics
The respective expressions for complimentary function and particular integral part of the solution of the differential equation d4y/dx4+3d2y/dx2=108x2 are
Ques 12 Engineering Mechanics
The magnitudes of vectors P, Q and R are 100 kN, 250 kN and 150 kN, respectively as shown in the figure.

Ques 13 Engineering Surveys
The staff reading taken on a workshop floor using a level is 0.645 m. The inverted staff reading taken to the bottom of a beam is 2.960 m. The reduced level of the floor is 40.500 m. The reduced level (expressed in m) of the bottom of the beam is
44.105 is the correct answer.

Total Unique Visitors