Chemical Engineering Gate Yearwise
Chemical Eng. Gate 2024
Chemical Eng. Gate 2023
Chemical Eng. Gate 2022
Chemical Eng. Gate 2021
Chemical Eng. Gate 2020
Chemical Eng. Gate 2019
Chemical Eng. Gate 2018
Chemical Eng. Gate 2017
Chemical Eng. Gate 2016
Chemical Eng. Gate 2015
Chemical Eng. Gate 2014
Chemical Eng. Gate 2013
Chemical Eng. Gate 2012
Chemical Eng. Gate 2011
Chemical Eng. Gate 2010
Chemical Engineering Gate 2013 Questions with Answer
Ques 27 GATE 2013
For a Newtonian fluid flowing in a circular pipe under steady state conditions in fully developed laminar flow, the Fanning friction factor is
Ques 28 GATE 2013
Water (density 1000 kg/m3) is flowing through a nozzle, as shown below and exiting to the atmosphere. The relationship between the diameters of the nozzle at locations 1 and 2 is D1=4 D2. The average velocity of the stream at location 2 is 16 m/s and the frictional loss between location 1 and location 2 is 10000 Pa. Assuming steady state and turbulent flow, the gauge pressure in Pa, at location 1 is

Ques 29 GATE 2013
The number of emails received on six consecutive days is 11, 9, 18, 18, 4 and 15, respectively. What are the median and the mode for these data?
Ques 30 GATE 2013
For two rolls of a fair die, the probability of getting a 4 in the first roll and a number less than 4 in the second roll, up to 3 digits after the decimal point, is
Ques 31 GATE 2013
If 3≤ X≤5 and 8≤ Y≤11 then which of the following options is TRUE?
Ques 32 GATE 2013
The Headmaster _______ to speak to you.
Which of the following options is incorrect to complete the above sentence?
Ques 33 GATE 2013
Mahatama Gandhi was known for his humility as
Ques 34 GATE 2013

Ques 35 GATE 2013
Velocity of an object fired directly in upward direction is given by V=80-32t where t (time) is in seconds. When will the velocity be between 32 m/sec and 64 m/sec?
Ques 36 GATE 2013
Select the pair that best expresses a relationship similar to that expressed in the pair:
water: pipe::
Ques 37 GATE 2013
In a factory, two machines M1 and M2 manufacture 60% and 40% of the autocomponents respectively. Out of the total production, 2% of M1 and 3% of M2 are found to be defective. If a randomly drawn autocomponent from the combined lot is found defective, what is the probability that it was manufactured by M2?
Ques 38 GATE 2013
Following table gives data on tourists from different countries visiting India in the year 2011.
| Country | Number of Tourists |
|---|---|
| USA | 2000 |
| England | 3500 |
| Germany | 1200 |
| Italy | 1100 |
| Japan | 2400 |
| Australia | 2300 |
| France | 1000 |
Which two countries contributed to the one third of the total number of tourists who visited India in 2011?
Ques 39 GATE 2013
If |-2X+9|=3 then the possible value of |-X|-X2 would be:
Total Unique Visitors