Chemical Engineering Gate Yearwise
Chemical Eng. Gate 2024
Chemical Eng. Gate 2023
Chemical Eng. Gate 2022
Chemical Eng. Gate 2021
Chemical Eng. Gate 2020
Chemical Eng. Gate 2019
Chemical Eng. Gate 2018
Chemical Eng. Gate 2017
Chemical Eng. Gate 2016
Chemical Eng. Gate 2015
Chemical Eng. Gate 2014
Chemical Eng. Gate 2013
Chemical Eng. Gate 2012
Chemical Eng. Gate 2011
Chemical Eng. Gate 2010
Chemical Engineering Gate 2014 Questions with Answer
Ques 53 GATE 2014
A spherical storage tank is quarter-filled with toluene. The diameter of the vent at the top of the tank is 1/20th of the diameter of the vessel. Under the steady state condition, the diffusive flux of toluene vapor is largest at
Ques 54 GATE 2014
Assuming the mass transfer coefficients in the gas and the liquid phases are comparable, the absorption of CO2 from reformer gas (CO2+H2) into an aqueous solution of diethanolamine is controlled by
Ques 55 GATE 2014
Which ONE of the following statements is CORRECT for the surface renewal theory?
Ques 56 GATE 2014
Steam economy of a multiple effect evaporator system is defined as
Ques 57 GATE 2014
A spherical ball of benzoic acid (diameter = 1.5 cm) is submerged in a pool of still water. The solubility and diffusivity of benzoic acid in water are 0.03 kmol/m3 and 1.25×10-9m2/s respectively. Sherwood number is given as Sh=2.0+0.6 Re0.5Sc0.33. The initial rate of dissolution (in kmol/s) of benzoic acid approximately is
Ques 58 GATE 2014
A wet solid of 100 kg is dried from a moisture content of 40 wt% to 10 wt%. The critical moisture content is 15 wt% and the equilibrium moisture content is negligible. All moisture contents are on dry basis. The falling rate is considered to be linear. It takes 5 hours to dry the material in the constant rate period. The duration (in hours) of the falling rate period is
Ques 59 GATE 2014
A binary distillation column is operating with a mixed feed containing 20 mol% vapour. If the feed quality is changed to 80 mol% vapour, the change in the slope of the q-line is
Ques 60 GATE 2014
In order to produce fine solid particles between 5 and 10 μm the appropriate size reducing equipment is
Ques 61 GATE 2014
Slurries are most conveniently pumped by a
Ques 62 GATE 2014
Match the following

Ques 63 GATE 2014
Match the
P. Turbulence
Q. NPSH
R. Ergun equation
S. Rotameter
T. Power number
Group 2
I. Reciprocating pump
II. Packed bed
III. Fluctuating velocity
IV. Impeller
V. Vena contracta
Ques 64 GATE 2014
A cash flow of Rs. 12,000 per year is received at the end of each year (uniform periodic payment) for 7 consecutive years. The rate of interest is 9% per year compounded annually. The present worth (in Rs.) of such cash flow at time zero is
Ques 65 GATE 2014
A polymer plant with a production capacity of 10,000 tons per year has an overall yield of 70%, on mass basis (kg of product per kg of raw material). The raw material costs Rs. 50,000 per ton. A process modification is proposed to increase the overall yield to 75% with an investment of Rs. 12.5 crore. In how many years can the invested amount be recovered with the additional profit?
Total Unique Visitors