Textile Engineering Gate 2020 Questions with Answer

Ques 53 GATE 2020


The 'standard machine rate of loading' of a tensile tester, working on pendulum lever principle, is 440 N/cm. As the pendulum lever swings from 30° to 45° the machine rate of loading (N/cm) reduces by (rounded off to 2 decimal places) __________.


(69.00 to 71.00) is the correct answer.

Ques 54 GATE 2020


Under a load of 500 cN, the extension of a yarn of 300 mm length is 10%. If the elastic recovery is 90%, then the length (mm) of the yarn after removal of load is


(303) is the correct answer.

Ques 55 GATE 2020


In carding, the highest draft is kept between

A

Lap roller and feed roller

B

Feed roller and licker-in

C

Licker-in and cylinder

D

Cylinder and doffer


(b) is the correct answer.

Ques 56 GATE 2020


The spinning system in which one revolution of twisting element imparts several turns to the fibre strand is

A

Ring

B

Rotor

C

Friction

D

Wrap


(c) is the correct answer.

Ques 57 GATE 2020


A twin-delivery drawframe, running at a delivery speed of 800 m/min with an efficiency of 95%, is producing 5.9 ktex sliver. The rate of production of the drawframe in kg/h (rounded off to 2 decimal places) is _________.


(537.00 to 539.00) is the correct answer.

Ques 58 GATE 2020


The diameter (mm) of a yarn having twist of 700 turns per meter and surface-twist angle of 20° (rounded off to 2 decimal places) is _________.


(0.16 to 0.18) is the correct answer.

Ques 59 GATE 2020


A magazine creel has 800 package holders. The effective creel capacity (number) is ___________.


(400) is the correct answer.

Ques 60 GATE 2020


Carding of polyester fibres requires that the values of wire-point density (points/inch2) of (P) Licker-in, (Q) Cylinder, and (R) Flat follow which order?

A

P<Q<R

B

P<R<Q

C

Q<R<P

D

Q<P<R


(b) is the correct answer.

Ques 61 GATE 2020


For combing with forward feed, the given parameters are:
Detachment setting = 15 mm, Length of feed per combing cycle = 6mm, Longest fiber length = 30 mm.
According to Gégauff's theory, the noil (%) would be

A

9

B

16

C

30

D

49


(b) is the correct answer.

Ques 62 GATE 2020


Determine the correctness or otherwise of the following Assertion [a] and Reason [r]
[a]: Open-loop autolevelling system needs a signal storage device with time delay function.
[r]: The signal must be stored until the material reaches the adjusting point.

A

Both [a] and [r] are true and [r] is the correct reason for [a]

B

Both [a] and [r] are true but [r] is not the correct reason for [a]

C

Both [a] and [r] are false

D

[a] is true but [r] is false


(a) is the correct answer.

Ques 63 GATE 2020


If both the concentration (% w/w) of size paste and target add-on are 12%, the total wet pick-up (kg) by 12 kg bone-dry warp sheet is

A

6

B

12

C

18

D

24


(c) is the correct answer.

Ques 64 GATE 2020


Two rovings, each with mass CV of 10%, are fed to a ring spinning machine that adds a mass CV of 20%. The mass CV (%) of the yarn (rounded off to 2 decimal places) is


(21.00 to 22.00) is the correct answer.

Ques 65 GATE 2020


In a drumdriven -winder, the grooved drum having a width of 20 cm is rotating at 1000 rpm. If the drum makes 5 revolutions per double traverse, the traverse speed (m/min) is


(80) is the correct answer.

Unique Visitor Count

Total Unique Visitors

Loading......