Mining Engineering Gate Yearwise
Mining Eng. Gate 2024
Mining Eng. Gate 2023
Mining Eng. Gate 2022
Mining Eng. Gate 2021
Mining Eng. Gate 2020
Mining Eng. Gate 2019
Mining Eng. Gate 2018
Mining Eng. Gate 2017
Mining Eng. Gate 2016
Mining Eng. Gate 2015
Mining Eng. Gate 2014
Mining Eng. Gate 2013
Mining Eng. Gate 2012
Mining Eng. Gate 2011
Mining Eng. Gate 2010
Mining Eng. Gate 2009
Mining Eng. Gate 2008
Mining Eng. Gate 2007
Mining Engineering Gate 2022 Questions with Answer
Ques 27 GATE 2022
A square pattern of blasting is shown in the figure. For the case of simultaneous blast, identify the zone of no fragmentation P.

Ques 28 GATE 2022
The correct vertical stress profile in the case of tributary area method for pillar design is

Ques 29 GATE 2022
The bottom section of a stoping block has dimensions 200 m×40 m. If the modified RMR of rock mass is 50, the appropriate method of mining on the basis of Laubscher's chart in the figure is

Ques 30 GATE 2022
Match the machine with its component. Machine Component

Ques 31 GATE 2022
Which one of the following is NOT a notifiable disease as per Indian mining legislation?
Ques 32 GATE 2022
If the ambient lapse rate is higher than the dry adiabatic lapse rate, the atmosphere is
Ques 33 GATE 2022
Identify the WRONG statement:
The application of controlled air recirculation in an underground work place can
Ques 34 GATE 2022
The correct order of pavement layers for a haul road from top to bottom is
Ques 35 GATE 2022
A mining company produces iron ore and sells to another company. Royalty to be paid is on the basis of
Ques 36 GATE 2022
The cost of a screw compressor with an estimated life of 15 years is 21,00,000. If the depreciation of the compressor charged, using 'sum-of-the-years-digits' method, at the end of 4th year is ₹2,00,000, the salvage value, in is _________. (round off to one decimal place)
Ques 37 GATE 2022
A safety device consists of two independent critical components X1 and X2. The failure of any one or both of these components can cause an accident. The failure probabilities of components X1 and X2 are 0.2 and 0.1, respectively. The probability of occurrence of an accident is __________.(round off to two decimal places)
Ques 38 GATE 2022
In a levelling survey, a reading is taken as 2.25 m. However, along the line of sight there is deflection of 20 cm with respect to vertical position of the staff. The correct reading, in m is ________. (round off to two decimal places)
Ques 39 GATE 2022
Water flows through a vertical sand column of cross sectional area 4000 mm2 and length 300 mm. For a water head of 600 mm, quantity of seepage water is 100 mm3/min. The hydraulic conductivity of the sand column, in mm/min is _________. (round off to three decimal places)
Total Unique Visitors