Textile Engineering > GATE 2024 > Yarn Structure
Group I lists yarn manufacturing technologies and Group II contains typical structural features of the yarns. Match the manufacturing technology with the structural features of the yarn.
A
P-1, Q-3, R-4, S-2
B
P-1, Q-4, R-3, S-2
C
P-2, Q-4, R-1, S-3
D
P-2, Q-3, R-1, S-4

Correct : c

Similar Questions

If the distance between two adjacent fibres of circular cross-section in a hexagonally packed yarn is equal to the radius of the fibre, then the packing density...
#472 NAT
The surface helix angle of a fibre in a yarn of 0.3 mm diameter is 30°. Assuming ideal helix geometry, the helix angle (in degrees), of a fibre situated at 0.1...
#672 NAT
Yarn diameter (D) is related to yarn linear density (T) as per the following equation.D = K√Twhere K is a coefficient which depends on fibre density (ρ) and yar...
#1101 MCQ

Related Topics

yarn manufacturing technologies textile engineering GATE yarn structure features GATE 2024 Textile Engineering yarn manufacturing tech textile engineering match yarn structure GATE textile engineering questions

Unique Visitor Count

Total Unique Visitors

Loading......

Question Options

Contributed by: