Textile Engineering > GATE 2021 > Draw Frame
Assuming no fibre loss in draw frame, if draft is equal to doubling then the delivered sliver, as compared to fed sliver, will exhibit
A
Decreased mass variation and higher linear density
B
Increased mass variation and lower linear density
C
Improved fibre orientation without change in linear density
D
Poor fibre orientation without change in linear density

Correct : c

Similar Questions

In a 3 over 3 drafting arrangement, the diameter of all bottom rollers is 28 mm. The back zone draft is 1.3 and the front zone draft is 6. If the back bottom ro...
#243 NAT
A twin-delivery drawframe, running at a delivery speed of 800 m/min with an efficiency of 95%, is producing 5.9 ktex sliver. The rate of production of the drawf...
#279 NAT
Six carded slivers of 4 ktex each are drawn to produce a sliver of 5 ktex. The draft required (rounded off to 1 decimal place) is ________.
#344 NAT

Related Topics

textile engineering gate 2021 sliver draw frame fibre loss sliver mass variation linear density change improved fibre orientation gate textile engineering gate 2021 text sliver fed to delivered variation

Unique Visitor Count

Total Unique Visitors

Loading......

Question Options

Contributed by: