Textile Engineering > GATE 2019 > Draw Frame
A drawframe with a 3 over 3 drafting arrangement, having an eccentric bottom middle roller of 28 mm diameter, is used to produce a sliver. The back zone and front zone drafts are 1.7 and 3.5, respectively. The sliver is further given a draft of 200 to produce a yarn. The wavelength (m) of the periodic fault in the yarn approximately is
Correct : c
Similar Questions
Assuming no fibre loss in draw frame, if draft is equal to doubling then the delivered sliver, as compared to fed sliver, will exhibit
In a 3 over 3 drafting arrangement, the diameter of all bottom rollers is 28 mm. The back zone draft is 1.3 and the front zone draft is 6. If the back bottom ro...
A twin-delivery drawframe, running at a delivery speed of 800 m/min with an efficiency of 95%, is producing 5.9 ktex sliver. The rate of production of the drawf...
Total Unique Visitors
Loading......