Textile Engineering > GATE 2017 > Fabric Testing
The compressive pressure applied onto a fabric is inversely proportional to the cube of thickness of the fabric. If the thickness is halved during compression, then the pressure increases by times.

Correct : 6.9 to 8.1

Similar Questions

A high value of drape coefficient indicates
#207 MCQ
A woven fabric with areal density of $300g/m2 is tested by strip tensile test method, keeping the specimen width as 5 cm and gauge length as 25 cm. If the break...
#248 NAT
A fabric with a mass per unit area of 250 g/m² has a flexural rigidity of 275 μN⋅m. What is the bending length (in mm) of the fabric, rounded off to two decimal...
#312 NAT

Related Topics

compressive pressure fabric textile engineering gate 2017 pressure thickness relationship fabric compression GATE textile engineering 2017 pressure increase halved thickness inverse cube relationship fabric engineering pressure

Unique Visitor Count

Total Unique Visitors

Loading......

Question Options

Contributed by: