Textile Engineering > GATE 2016 > Fabric Testing
The flexural rigidity, expressed in 10⁻⁴ mg cm, of a fabric test specimen of 100 g/m² areal density and 0.40 mm length of overhang determined using a cantilever test with a standard angle of deflection of 41.5°, is

Correct : 0.79: 0.85

Similar Questions

A high value of drape coefficient indicates
#207 MCQ
A woven fabric with areal density of $300g/m2 is tested by strip tensile test method, keeping the specimen width as 5 cm and gauge length as 25 cm. If the break...
#248 NAT
A fabric with a mass per unit area of 250 g/m² has a flexural rigidity of 275 μN⋅m. What is the bending length (in mm) of the fabric, rounded off to two decimal...
#312 NAT

Related Topics

textile engineering gate 2016 flexural rigidity textile cantilever test textile fabric test specimen GATE textile engineering 2016 textile engineering deflection textile engineering area density textile engineering deflection angle 41.5°

Unique Visitor Count

Total Unique Visitors

Loading......

Question Options

Contributed by: