Textile Engineering > GATE 2013 > Winding
A winding machine without anti-patterning device has the following particulars:
Cylindrical winding drum diameter: 75 mm
Number of crossing on drum: 2
Rotational speed of the drum: 2860 rev/min
Traverse length: 150 mm
A 3.5 degree constant taper cone is built on the above cone winder with no movement of the point of drive during the package build up. At mean cone diameter of 150 mm the package rev/min is 1375.
Distance in mm of point of drive from the base of the cone along the traverse is approximately
Cylindrical winding drum diameter: 75 mm
Number of crossing on drum: 2
Rotational speed of the drum: 2860 rev/min
Traverse length: 150 mm
A 3.5 degree constant taper cone is built on the above cone winder with no movement of the point of drive during the package build up. At mean cone diameter of 150 mm the package rev/min is 1375.
Distance in mm of point of drive from the base of the cone along the traverse is approximately
Correct : a
Similar Questions
Assume that there is no compression of roving during winding and each coil of a layer is placed directly over the coil of the previous layer. A full roving bobb...
Determine the correctness or otherwise of the following Assertion [a] and Reason [r].[a]: As compared to parallel wound yarn packages, ring bobbins exhibit lowe...
In winding, if traverse speed and package surface speed are the same, the angle of wind (in degree) is
Total Unique Visitors
Loading......