Textile Engineering > GATE 2010 > Draw Frame
Pressure bar is provided in a draw frame to
A
Increase the pressure on the middle top drafting roller
B
Reduce the intensity of drafting waves in the drafted strand of fibres
C
Reduce the pressure on the middle top drafting roller
D
Reduce the formation of neps in the drafted strand of fibres

Correct : c

Similar Questions

Assuming no fibre loss in draw frame, if draft is equal to doubling then the delivered sliver, as compared to fed sliver, will exhibit
#229 MCQ
In a 3 over 3 drafting arrangement, the diameter of all bottom rollers is 28 mm. The back zone draft is 1.3 and the front zone draft is 6. If the back bottom ro...
#243 NAT
A twin-delivery drawframe, running at a delivery speed of 800 m/min with an efficiency of 95%, is producing 5.9 ktex sliver. The rate of production of the drawf...
#279 NAT

Related Topics

textile engineering gate 2010 drafting frame pressure reduce drafting waves reduce neps increase drafting roller pressure textile engineering drafting frame mechanics GATE textile engineering 2010

Unique Visitor Count

Total Unique Visitors

Loading......

Question Options

Contributed by: