Mining Engineering > GATE 2024 > Underground Coal Mining
For a continuous miner (CM) panel, the following data are given. Data related to CM A Table:
Assume, unit weight of coal is 1.4 tonne/m3 and its swell factor is 1.2. Consider, 6 working hours per shift.
The non-working time in min, in working hours per shuttle car to dispatch all coal cut by the CM, is __________.(round off up to 2 decimals)
The non-working time in min, in working hours per shuttle car to dispatch all coal cut by the CM, is __________.(round off up to 2 decimals)
Correct : 14.76
Similar Questions
A Bord and Pillar panel is developed at a depth of 250 m in a flat coal seam. The vertical stress gradient is 0.027 MPa/m. If the strength of a square pillar is...
'Critical subsidence has occurred on the surface due to mining of a flat longwall panel at a depth of 200 m. The width of the panel is 150 m. The maximum width...
A coal seam of 3.0 m height is mined with a double-ended ranging drum shearer (DERDS) for a web depth of 0.5 m. The coal density is 1.4 tonne/m3. If the panel w...
Total Unique Visitors
Loading......