Mechanical Engineering > GATE 2026 > Metal Cutting
During orthogonal turning by using a single point cutting tool, feed rate is 0.24 mm/rev. The uncut chip thickness is 0.23 mm. The shear angle, tangential force component, and radial force component are 20°, 800 N, and 150 N, respectively. The value of shear force is ________ N (rounded off to 2 decimal places).
Correct : 723.35
Similar Questions
In an ideal orthogonal cutting experiment (see figure), the cutting speed V is 1 m/s. the rake angle of the tool α = 5 degrees, and the shear angle, φ, is known...
Under orthogonal cutting condition, a turning operation is carried out on a
metallic workpiece at a cutting speed of 4 m/s. The orthogonal rake angle of the...
The main cutting force acting on a tool during the turning (orthogonal cutting) operation of a metal is 400 N. The turning was performed using 2 mm depth of cut...
Total Unique Visitors
Loading......