Mechanical Engineering > GATE 2023 > Additive Manufacturing
A solid part (see figure) of polymer material is to be fabricated by additive manufacturing (AM) in square-shaped layers starting from the bottom of the part working upwards. The nozzle diameter of the AM machine is a/10 mm and the nozzle follows a linear serpentine path parallel to the sides of the square layers with a feed rate of a/5mm/min.
Ignore any tool path motions other than those involved in adding material, and any other delays between layers or the serpentine scan lines.
The time taken to fabricate this part is _______ minutes.
(Answer in integer)
Ignore any tool path motions other than those involved in adding material, and any other delays between layers or the serpentine scan lines.
The time taken to fabricate this part is _______ minutes.
(Answer in integer)
Correct : 455
Similar Questions
Which of the following additive manufacturing technique(s) can use a wire as a feedstock material?
In relation to additive manufacturing, match the followingProcessMaterialLayer creation techniqueP Stereolithography1 Injection of powder streamI PaperQ Fused d...
After playing _________ hours of tennis, I am feeling _________ tired to walk back.
Total Unique Visitors
Loading......