Mechanical Engineering > GATE 2022 SET-2 > Machining
In an orthogonal machining operation, the cutting and thrust forces are equal in
magnitude. The uncut chip thickness is 0.5 mm and the shear angle is 15°. The
orthogonal rake angle of the tool is 0° and the width of cut is 2 mm. The workpiece
material is perfectly plastic and its yield shear strength is 500 MPa. The cutting force is _______ N (round off to the nearest integer)
Correct :
Similar Questions
Parts P1-P7 are machined first on a milling machine and then polished at a separate
machine. Using the information in the following table, the minimum total...
A steel bar 200 mm in diameter is turned at a feed of 0.25 mm/rev with a depth of cut of 4 mm. The rotational speed of the workpiece is 160 rpm. The material re...
Two cutting tools are being compared for a machining operation. The tool life equations are:Carbide tool: VT1.6 = 3000HSS tool: VT0.6 = 200where V is the cuttin...
Total Unique Visitors
Loading......