Mechanical Engineering > GATE 2022 SET-1 > Welding
Two mild steel plates of similar thickness, in butt-joint configuration, are welded by gas tungsten arc welding process using the following welding parameters:
The filler wire feed rate is selected such that the final weld bead is composed of 60% volume of filler and 40% volume of plate material. The heat required to melt the mild steel material is 10 J/mm³. The heat transfer factor is 0.7 and melting factor is 0.6. The feed rate of the filler wire is __________ mm/s (round off to one decimal place).
Correct : 3.5
Similar Questions
The most suitable electrode material used for joining low alloy steels using Gas Metal Arc Welding (GMAW) process is
In an arc welding process, the voltage and current are 30 V and 200 A, respectively. The cross-sectional area of the joint is 20 m m 2 and the welding speed is...
In an direct current arc welding process, the power source has an open circuit voltage
of 100 V and short circuit current of 1000 A. Assume a linear relations...
Total Unique Visitors
Loading......