Mechanical Engineering > GATE 2017 SET-2 > Machining
In an orthogonal machining with a tool of 9° orthogonal rake angle, the uncut chip thickness is 0.2 mm. The chip thickness fluctuates between 0.25 mm and 0.4 mm. The ratio of the maximum shear angle to the minimum shear angle during machining is ________.
Correct : 1.49
Similar Questions
Parts P1-P7 are machined first on a milling machine and then polished at a separate
machine. Using the information in the following table, the minimum total...
In an orthogonal machining operation, the cutting and thrust forces are equal in
magnitude. The uncut chip thickness is 0.5 mm and the shear angle is 15°. The...
A steel bar 200 mm in diameter is turned at a feed of 0.25 mm/rev with a depth of cut of 4 mm. The rotational speed of the workpiece is 160 rpm. The material re...
Total Unique Visitors
Loading......