Mechanical Engineering > GATE 2017 SET-2 > Machining
During the turning of a 20 mm-diameter steel bar at a spindle speed of 400 rpm, a tool life of 20 minute is obtained. When the same bar is turned at 200 rpm, the tool life becomes 60 minute. Assume that Taylor's tool life equation is valid. When the bar is turned at 300 rpm, the tool life (in minute) is approximately
Correct : b
Similar Questions
Parts P1-P7 are machined first on a milling machine and then polished at a separate
machine. Using the information in the following table, the minimum total...
In an orthogonal machining operation, the cutting and thrust forces are equal in
magnitude. The uncut chip thickness is 0.5 mm and the shear angle is 15°. The...
A steel bar 200 mm in diameter is turned at a feed of 0.25 mm/rev with a depth of cut of 4 mm. The rotational speed of the workpiece is 160 rpm. The material re...
Total Unique Visitors
Loading......