Mechanical Engineering > GATE 2015 SET-2 > Welding
During a TIG welding process, the arc current and arc voltage were 50 A and 60 V, respectively, when the welding speed was 150 mm/min. In another process, the TIG welding is carried out at a welding speed of 120 mm/min at the same arc voltage and heat input to the material so that weld quality remains the same. The welding current (in A) for this process is
A
40.00
B
44.72
C
55.90
D
62.25

Correct : a

Similar Questions

The most suitable electrode material used for joining low alloy steels using Gas Metal Arc Welding (GMAW) process is
#189 MCQ
In an arc welding process, the voltage and current are 30 V and 200 A, respectively. The cross-sectional area of the joint is 20 m m 2 and the welding speed is...
#206 Fill in the Blanks
Two mild steel plates of similar thickness, in butt-joint configuration, are welded by gas tungsten arc welding process using the following welding parameters:...
#317 Fill in the Blanks

Related Topics

TIG welding process arc current calculation GATE Mechanical Engineering 2015 mechanical engineering gate weld speed impact heat input TIG welding welding current determination GATE set 2 question 61 TIG welding parameters

Unique Visitor Count

Total Unique Visitors

Loading......

Question Options

Contributed by: