Mechanical Engineering > GATE 2015 SET-1 > Machining
An orthogonal turning operation is carried out under the following conditions: rake angle = 5°; spindle rotational speed = 400 rpm; axial feed = 0.4 m/min and radial depth of cut = 5 mm. The chip thickness, tc, is found to be 3 mm. The shear angle (in degrees) in this turning process is ________.
Correct : 18.7
Similar Questions
Parts P1-P7 are machined first on a milling machine and then polished at a separate
machine. Using the information in the following table, the minimum total...
In an orthogonal machining operation, the cutting and thrust forces are equal in
magnitude. The uncut chip thickness is 0.5 mm and the shear angle is 15°. The...
A steel bar 200 mm in diameter is turned at a feed of 0.25 mm/rev with a depth of cut of 4 mm. The rotational speed of the workpiece is 160 rpm. The material re...
Total Unique Visitors
Loading......