Mechanical Engineering > GATE 2015 SET-1 > Limits, Fits and Tolerances
In the assembly shown below, the part dimensions are: L1 = 22.0±0.01 mm, L2 = L3 = 10.0±0.005 mm. Assuming the normal distribution of part dimensions, the dimension L4 in mm for assembly condition would be:
Correct : b
Similar Questions
Cylindrical pins of 25+0.020+0.010 mm diameter are electroplated in a shop. Thickness of the plating is 30±2.0 micron. Neglecting gage tolerances, the size of t...
Cylindrical pins of 25+0.020+0.010 mm diameter are electroplated in a shop. Thickness of the plating is 30±2.0 micron. Neglecting gage tolerances, the size of t...
The standard deviation of linear dimensions P and Q are 3 μm and 4 μm, respectively. When assembled, the standard deviation (in μm) of the resulting linear dime...
Total Unique Visitors
Loading......