Mechanical Engineering > GATE 2015 SET-1 > Limits, Fits and Tolerances
Holes of diameter 25.0+0.040+0.020 mm are assembled interchangeably with the pins of diameter 25.0+0.005-0.008 mm. The minimum clearance in the assembly will be
A
0.048 mm
B
0.015 mm
C
0.005 mm
D
0.008 mm

Correct : b

Similar Questions

Cylindrical pins of 25+0.020+0.010 mm diameter are electroplated in a shop. Thickness of the plating is 30±2.0 micron. Neglecting gage tolerances, the size of t...
#801 MCQ
Cylindrical pins of 25+0.020+0.010 mm diameter are electroplated in a shop. Thickness of the plating is 30±2.0 micron. Neglecting gage tolerances, the size of t...
#845 MCQ
The standard deviation of linear dimensions P and Q are 3 μm and 4 μm, respectively. When assembled, the standard deviation (in μm) of the resulting linear dime...
#973 Fill in the Blanks

Related Topics

hole diameter tolerance pin diameter tolerance GATE Mechanical Engineering 2015 clearance assembly minimum clearance calculation mechanical engineering gate hole pin assembly tolerance analysis GATE set-1 question 37

Unique Visitor Count

Total Unique Visitors

Loading......

Question Options

Contributed by: