Mechanical Engineering > GATE 2014 SET-3 > Manufacturing Technology
A cylindrical riser with diameter d and height h, is placed on the top of the mold cavity of a closed type sand mold as shown in the figure. If the riser is of constant volume, then the rate of solidification in the riser is the least when the ratio h:d is
Correct : a
Similar Questions
The process utilizing mainly thermal energy for removing material is
A straight turning operation is carried out using a single point cutting tool on an AISI 1020 steel rod. The feed is 0.2 mm/rev and the depth of cut is 0.5 mm....
Match the casting defects (Group A) with the probable causes (Group B):Group AP: Hot tearsQ: ShrinkageR: Blow holesS: Cold ShutGroup B1: Improper fusion of two...
Total Unique Visitors
Loading......