Mechanical Engineering > GATE 2014 Set-1 > Metal Cutting
During pure orthogonal turning operation of a hollow cylindrical pipe, it is found that the thickness of the chip produced is 0.5 mm. The feed given to the zero degree rake angle tool is 0.2 mm/rev. The shear strain produced during the operation is _______
Correct : 2.8 to 3.0
Similar Questions
In an ideal orthogonal cutting experiment (see figure), the cutting speed V is 1 m/s. the rake angle of the tool α = 5 degrees, and the shear angle, φ, is known...
Under orthogonal cutting condition, a turning operation is carried out on a
metallic workpiece at a cutting speed of 4 m/s. The orthogonal rake angle of the...
The main cutting force acting on a tool during the turning (orthogonal cutting) operation of a metal is 400 N. The turning was performed using 2 mm depth of cut...
Total Unique Visitors
Loading......