Mechanical Engineering > GATE 2013 SET-3 > Limits, Fits and Tolerances
Cylindrical pins of 25+0.020+0.010 mm diameter are electroplated in a shop. Thickness of the plating is 30±2.0 micron. Neglecting gage tolerances, the size of the GO gage in mm to inspect the plated components is
A
25.042
B
25.052
C
25.074
D
25.084

Correct : d

Similar Questions

Cylindrical pins of 25+0.020+0.010 mm diameter are electroplated in a shop. Thickness of the plating is 30±2.0 micron. Neglecting gage tolerances, the size of t...
#845 MCQ
The standard deviation of linear dimensions P and Q are 3 μm and 4 μm, respectively. When assembled, the standard deviation (in μm) of the resulting linear dime...
#973 Fill in the Blanks
Holes of diameter 25.0+0.040+0.020 mm are assembled interchangeably with the pins of diameter 25.0+0.005-0.008 mm. The minimum clearance in the assembly will be
#1222 MCQ

Related Topics

cylindrical pins diameter tolerance GATE Mechanical Engineering 2013 plating thickness tolerance GO gage size inspection mechanical engineering gate pin tolerances electroplated components inspection gage tolerance mechanical engineering

Unique Visitor Count

Total Unique Visitors

Loading......

Question Options

Contributed by: