Mechanical Engineering > GATE 2013 SET-3 > Machining
A steel bar 200 mm in diameter is turned at a feed of 0.25 mm/rev with a depth of cut of 4 mm. The rotational speed of the workpiece is 160 rpm. The material removal rate in mm3/s is
Correct : d
Similar Questions
Parts P1-P7 are machined first on a milling machine and then polished at a separate
machine. Using the information in the following table, the minimum total...
In an orthogonal machining operation, the cutting and thrust forces are equal in
magnitude. The uncut chip thickness is 0.5 mm and the shear angle is 15°. The...
Two cutting tools are being compared for a machining operation. The tool life equations are:Carbide tool: VT1.6 = 3000HSS tool: VT0.6 = 200where V is the cuttin...
Total Unique Visitors
Loading......