Mechanical Engineering > GATE 2013 SET-2 > Manufacturing
In orthogonal turning of a bar of 100 mm diameter with a feed of 0.25 mm/rev, depth of cut of 4 mm and cutting velocity of 90 m/min, it is observed that the main (tangential) cutting force is perpendicular to the friction force acting at the chip-tool interface. The main (tangential) cutting force is 1500 N.
The orthogonal rake angle of the cutting tool in degree is
The orthogonal rake angle of the cutting tool in degree is
Correct : a
Similar Questions
Within the Heat Affected Zone (HAZ) in a fusion welding process, the work material undergoes
Two separate slab milling operations, 1 and 2, are performed with identical milling cutters. The depth of cut in operation 2 is twice that in operation 1. The o...
The principle of material removal in Electrochemical machining is
Total Unique Visitors
Loading......