Mechanical Engineering > GATE 2013 SET-2 > Machine Design
A single riveted lap joint of two similar plates has the following geometrical and material details:
width of the plate w = 200 mm, thickness of the plate t = 5 mm, number of rivets n = 3, diameter of the rivet dr = 10 mm, diameter of the rivet hole dh = 11 mm, allowable tensile stress of the plate ฯp = 200 MPa, allowable shear stress of the rivet ฯs = 100 MPa and allowable bearing stress of the rivet ฯc = 150 MPa.
If the plates are to be designed to avoid tearing failure, the maximum permissible load P in kN is
If the plates are to be designed to avoid tearing failure, the maximum permissible load P in kN is
Correct : c
Similar Questions
A square threaded screw is used to lift a load W by applying a force F. Efficiency of the square threaded screw is expressed as?
The type of fit between a mating shaft of diameter 25.0
mm and a hole of diameter 25.015
mm is __________.
A drum brake is shown in the figure. The drum is rotating in anticlockwise direction. The coefficient of friction between drum and shoe is 0.2. The dimensions s...
Total Unique Visitors
Loading......