Mechanical Engineering > GATE 2013 SET-2 > Metrology
Cylindrical pins of 25+0.020+0.010 mm diameter are electroplated in a shop. Thickness of the plating is 30±2.0 micron. Neglecting gage tolerances, the size of the GO gage in mm to inspect the plated components is
A
25.042
B
25.052
C
25.074
D
25.084

Correct : d

Similar Questions

A coordinate measuring machine (CMM) is used to determine the distance between Surface SP and Surface SQ of an approximately cuboidal shaped part. Surface SP is...
#262 Fill in the Blanks
An optical flat is used to measure the height difference between a reference slip gauge A and a slip gauge B. Upon viewing via the optical flat using a monochro...
#264 Fill in the Blanks
A GO-No GO plug gauge is to be designed for measuring a hole of nominal diameter 25 mm with a hole tolerance of ±0.015 mm. Considering 10% of work tolerance to...
#621 MCQ

Related Topics

cylindrical pin tolerance GATE Mechanical Engineering 2013 GO gage size electroplating thickness mechanical engineering gate tolerance inspection pin diameter inspection plating thickness variation

Unique Visitor Count

Total Unique Visitors

Loading......

Question Options

Contributed by: