Electrical Engineering > GATE 2021 > Transmission Lines
In the figure shown, self-impedances of the two transmission lines are 1.5j p.u each, and Zm = 0.5j p.u is the mutual impedance. Bus voltages shown in the figure are in p.u. Given that δ > 0, the maximum steady-state real power that can be transferred in p.u from Bus-1 to Bus-2 is
A
|E||V|
B
|E||V|/2
C
2|E||V|
D
3|E||V|/2

Correct : b

Similar Questions

A 50 Hz, 275 kV line of length 400 km has the following parameters: Resistance, R=0.035 Ω/km; Inductance, L=1 mH/km; Capacitance, C=0.01 μF/km. The line is repr...
#179 Fill in the Blanks
Consider a lossy transmission line with V1 and V2 as the sending and receiving end voltages, respectively. Z and X are the series impedance and reactance of the...
#371 MCQ
The series impedance matrix of a short three-phase transmission line in phase coordinates is If the positive sequence impedance is (1+j10) Ω, and the...
#383 Fill in the Blanks

Related Topics

transmission line self impedance mutual impedance transmission lines maximum steady state power GATE Electrical Engineering 2021 power transfer transmission lines transmission line impedance GATE 2021 question 44 complex power transmission lines

Unique Visitor Count

Total Unique Visitors

Loading......

Question Options

Contributed by: