Electrical Engineering > GATE 2018 > Transmission Lines
Consider a lossy transmission line with V1 and V2 as the sending and receiving end voltages, respectively. Z and X are the series impedance and reactance of the line, respectively. The steady-state stability limit for the transmission line will be
A
greater than |V1V2⁄X|
B
less than |V1V2⁄X|
C
equal to |V1V2⁄X|
D
equal to |V1V2⁄X|

Correct : b

Similar Questions

A 50 Hz, 275 kV line of length 400 km has the following parameters: Resistance, R=0.035 Ω/km; Inductance, L=1 mH/km; Capacitance, C=0.01 μF/km. The line is repr...
#179 Fill in the Blanks
In the figure shown, self-impedances of the two transmission lines are 1.5j p.u each, and Zm = 0.5j p.u is the mutual impedance. Bus voltages shown in the figur...
#255 MCQ
The series impedance matrix of a short three-phase transmission line in phase coordinates is If the positive sequence impedance is (1+j10) Ω, and the...
#383 Fill in the Blanks

Related Topics

transmission line stability lossy transmission line steady-state stability limit electrical engineering gate voltage reactance ratio transmission line impedance GATE Electrical Engineering 2018 voltage reactance ratio stability transmission line stability limit

Unique Visitor Count

Total Unique Visitors

Loading......

Question Options

Contributed by: