Electrical Engineering > GATE 2016 SET-2 > Electromagnetic Induction
A rotating conductor of 1 m length is placed in a radially outward (about the z-axis) magnetic flux density (B) of 1 Tesla as shown in figure below. Conductor is parallel to and at 1 m distance from the z-axis. The speed of the conductor in r.p.m. required to induce a voltage of 1 V across it, should be ________.

Correct : 9.55

Similar Questions

Consider a one-turn rectangular loop of wire placed in a uniform magnetic field as shown in the figure. The plane of the loop is perpendicular to the field line...
#700 NAT
A circular turn of radius 1 m revolves at 60 rpm about its diameter aligned with the x-axis as shown in the figure. The value of μ0 is 4πx10-7 in SI unit. If a...
#764 NAT
The figure shows an arbitrarily shaped planar conducting loop A in the XY plane. Two nonintersecting regions with areas a1 and a2 within the loop are subjected...
#1107 MCQ

Related Topics

induced voltage rotating conductor GATE Electrical Engineering 2016 electrical engineering gate magnetic flux induced voltage rotating conductor speed GATE 2016 Set-2 induced voltage calculation rotating conductor problem

Unique Visitor Count

Total Unique Visitors

Loading......

Question Options

Contributed by: