Electrical Engineering > GATE 2015 SET-2 > Voltage Measurement
A capacitive voltage divider is used to measure the bus voltage Vbus in a high-voltage 50 Hz AC system as shown in the figure. The measurement capacitors C1 and C2 have tolerances of ±10% on their nominal capacitance values. If the bus voltage Vbus is 100 kV rms, the maximum rms output voltage Vout (in kV), considering the capacitor tolerances, is ________.
Correct : 12.0
Similar Questions
As you grow older, an injury to your _________ may take longer to _________.
In a 500 m race, P and Q have speeds in the ratio of 3 ∶ 4. Q starts the race when P has already covered 140 m.
What is the distance between P and Q (in m) whe...
Three bells P, Q, and R are rung periodically in a school. P is rung every 20 minutes; Q is rung every 30 minutes and R is rung every 50 minutes. If all the thr...
Total Unique Visitors
Loading......