Electrical Engineering > GATE 2013 SET-1 > DC-DC Converters
In the figure shown below, the chopper feeds a resistive load from a battery source. MOSFET Q is switched at 250 kHz, with a duty ratio of 0.4. All elements of the circuit are assumed to be ideal.
The PEAK-TO-PEAK source current ripple in Amps is
A
0.96 A
B
0.144 A
C
0.192 A
D
0.288 A

Correct :

Similar Questions

In the DC-DC converter shown in the figure, the current through the inductor is continuous. The switching frequency is 500 Hz. The voltage (Vo) across the load...
#145 Fill in the Blanks
Consider the buck-boost converter shown. Switch Q is operating at 25 kHz and 0.75 duty-cycle. Assume diode and switch to be ideal. Under steady-state condition,...
#294 Fill in the Blanks
In the dc-dc converter circuit shown, switch Q is switched at a frequency of 10 kHz with a duty ratio of 0.6. All components of the circuit are ideal, and the i...
#325 Fill in the Blanks

Related Topics

chopper circuit analysis MOSFET switching peak to peak ripple current GATE Electrical Engineering 2013 electrical gate chopper circuit ripple current calculation GATE 2013 Set-1 chopper circuit analysis questions

Unique Visitor Count

Total Unique Visitors

Loading......

Question Options

Contributed by: