EC > GATE 2025 > Data Converters
A 10-bit analog-to-digital converter (ADC) has a sampling frequency of 1 MHz and a full scale voltage of 3.3 V.
For an input sinusoidal signal with frequency 500 kHz, the maximum SNR (in dB, rounded off to two decimal places) and the data rate (in Mbps) at the output of the ADC are respectively.
For an input sinusoidal signal with frequency 500 kHz, the maximum SNR (in dB, rounded off to two decimal places) and the data rate (in Mbps) at the output of the ADC are respectively.
Correct : 61.96
Similar Questions
A 4-bit weighted-resistor DAC with inputs b3, b2, b1, and b0 (MSB to LSB) is designed using an ideal opamp, as shown below. The switches are closed when the cor...
A 10-bit D/A converter is calibrated over the full range from 0 to 10 V. If the input to the D/A converter is 13A (in hex), the output (rounded off to three dec...
In an N bit flash ADC, the analog voltage is fed simultaneously to 2N comparators. The output of the comparators is then encoded to a binary format using digita...
Total Unique Visitors
Loading......