Civil Engineering > GATE 2019 SET-1 > Structural Analysis
A 16 mm thick gusset plate is connected to the 12 mm thick flange plate of an I-section using fillet welds on both sides as shown in the figure (not drawn to scale). The gusset plate is subjected to a point load of 350 kN acting at a distance of 100 mm from the flange plate. Size of fillet weld is 10 mm.
The maximum resultant stress (in MPa, round off to 1 decimal place) on the fillet weld along the vertical plane would be _______.
Correct : 78.0 to 78.2 or 105.3 to 105.5
Similar Questions
The figure shows a two-hinged parabolic arch of span L subjected to a uniformly distributed load of intensity q per unit length.
The maximum bending moment...
A planar truss tower structure is shown in the figure.
Consider the following statements about the external and internal determinacies of the truss.
(P) E...
The value of M in the beam ABC shown in the figure is such that the joint B does not rotate.
The value of support reaction (in kN) at B should be equal to _...
Total Unique Visitors
Loading......