Civil Engineering > GATE 2017 SET-2 > Geotechnical Engineering
For the construction of a highway, a cut is to be made as shown in the figure.
The soil exhibits c' = 20 kPa, φ' = 18° and the undrained shear strength = 80 kPa. The unit weight of water is 9.81 kN/m3. The unit weights of the soil above and below the ground water table are 18 and 20 kN/m3, respectively. If the shear stress at Point A is 50 kPa, the factors of safety against the shear failure at this point, considering the undrained and drained conditions, respectively, would be
A
1.6 and 0.9
B
0.9 and 1.6
C
0.6 and 1.2
D
1.2 and 0.6

Correct : a

Similar Questions

Group I lists the type of gain or loss of strength in soils. Group II lists the property or process responsible for the loss or gain of strength in soils. T...
#207 MCQ
A soil sample is subjected to a hydrostatic pressure, σ. The Mohr circle for any point in the soil sample would be
#208 MCQ
A strip footing is resting on the ground surface of a pure clay bed having an undrained cohesion Cu. The ultimate bearing capacity of the footing is equal to
#209 MCQ

Related Topics

cut soil stability analysis highway construction cut GATE Civil Engineering 2017 civil engineering gate undrained shear strength drained shear strength soil mechanics GATE highway cuts stability GATE set 2 question 37

Unique Visitor Count

Total Unique Visitors

Loading......