Civil Engineering > GATE 2015 SET-2 > Solid Mechanics
A simply supported beam AB of span, L = 24 m is subjected to two wheel loads acting at a distance, d = 5 m apart as shown in the figure below. Each wheel transmits a load, P = 3 kN and may occupy any position along the beam. If the beam is an I-section having section modulus, S = 16.2 cm3, the maximum bending stress (in GPa) due to the wheel loads is _______.
Correct : 1.785
Similar Questions
Two triangular wedges are glued together as shown in the following figure. The stress acting normal to the interface, σn is _______ MPa.
A tapered circular rod of diameter varying from 20 mm to 10 mm is connected to another uniform circular rod of diameter 10 mm as shown in the following figure....
For the plane stress situation shown in the figure, the maximum shear stress and the plane on which it acts are:
Total Unique Visitors
Loading......