GATE Civil Engineering 2013: Water Quality Parameters & Titrants | ExamPrev

```

Civil Engineering > GATE 2013 > Water Treatment

Some of the water quality parameters are measured by titrating a water sample with a titrant. Group-I gives a list of parameters and Group-II gives the list of titrants. The correct match of water quality parameters in Group-I with titrants in Group-II is:

A

P-1, Q-2, R-3, S-4

B

P-3, Q-4, R-1, S-2

C

P-2, Q-1, R-4, S-3

D

P-4, Q-3, R-2, S-1

Correct : b

Similar Questions

Activated carbon is used to remove a pollutant from wastewater in a mixed batch reactor, which follows first-order reaction kinetics. At a reaction rate of 0.38...

#951 Fill in the Blanks

A water treatment plant treats 25 MLD water with a natural alkalinity of 4.0 mg/L (as CaCO3). It is estimated that, during coagulation of this water, 450 kg/day...

#952 Fill in the Blanks

A hypothetical multimedia filter, consisting of anthracite particles (specific gravity: 1.50), silica sand (specific gravity: 2.60), and ilmenite sand (specific...

#998 MCQ

Related Topics

water quality parameters titrants GATE Civil Engineering 2013 environmental engineering water quality tests titration methods GATE 2013 Q20 civil engineering GATE

Unique Visitor Count

Total Unique Visitors

Loading......