Chemical Engineering > GATE 2011 > Pumps
Match the pumps in Group I with the corresponding fluids in Group II.
GROUP I
P. Gear pump
Q. Peristaltic pump
GROUP II
I. Highly viscous liquid
II. Aqueous sterile liquid
III. Slurry
A
P-III, Q-I
B
P-II, Q-I
C
P-III, Q-II
D
P-I, Q-II

Correct : d

Similar Questions

A centrifugal pump is used to pump water (density 1000 kg/m3) from an inlet pressure of 105 Pa to an exit pressure of 2×105 Pa. The exit is at an elevation of 1...
#339 Fill in the Blanks
A centrifugal pump delivers water at the rate of 0.22 m³/s from a reservoir at ground level to another reservoir at a height H, through a vertical pipe of 0.2 m...
#503 NAT
An adiabatic pump of efficiency 40% is used to increase the water pressure from 200 kPa to 600 kPa. The flow rate of water is 600 L/min. The specific heat of wa...
#632 NAT

Related Topics

pump fluid matching chemical engineering GATE 2011 gear pump peristaltic pump highly viscous liquid aqueous sterile liquid slurry GATE chemical engineering pump fluid application

Unique Visitor Count

Total Unique Visitors

Loading......

Question Options

Contributed by: