Aerospace Engineering > GATE 2023 > Torsion
The thickness of a uniform hollow circular shaft is equal to the difference between the outer radius and the inner radius. The ratio of the inner diameter to the outer diameter of the shaft is 0.5. For the shaft reacting to an applied torque, the ratio of the maximum shear stress ฯ to the maximum shear stress ฯthin-wall obtained using the thin-wall approximation is _______. (round off to one decimal place)
Correct : 1
Similar Questions
A thin-walled tube, with the cross-section shown in the figure, is subjected to a torque of T = 1 kN-m. The walls have uniform thickness t = 1 mm and shear modu...
A solid circular shaft is designed to transmit a torque T with a factor of safety of 2. It is proposed to replace the solid shaft by a hollow shaft of the same...
The thin rectangular tube shown below is made of a material with shear modulus, G=80 GPa. The shear flow is calculated based on the mid-thickness dimensions. If...
Total Unique Visitors
Loading......