Aerospace Engineering > GATE 2022 > Drag Estimation
A cylindrical object of diameter 900 mm is designed to move axially in air at 60 m/s. Its drag is estimated on a geometrically half-scaled model in water, assuming flow similarity.
Coefficients of dynamic viscosity and densities for air and water are 1.86 x 10-5 Pa-s, 1.2 kg/m3 and 1.01 x 10-3 Pa-s, 1000 kg/m3 respectively.
Drag measured for the model is 2280 N. Drag experienced by the full-scale object is _______ N. (rounded off to the nearest integer)
Coefficients of dynamic viscosity and densities for air and water are 1.86 x 10-5 Pa-s, 1.2 kg/m3 and 1.01 x 10-3 Pa-s, 1000 kg/m3 respectively.
Drag measured for the model is 2280 N. Drag experienced by the full-scale object is _______ N. (rounded off to the nearest integer)
Correct : b
Similar Questions
The figure (not to scale) shows a control volume to estimate the forces on the airfoil with elliptic cross-section. Surfaces 2 and 3 are streamlines. Velocity p...
The figure (not to scale) shows a control volume to estimate the forces on the airfoil with elliptic cross-section. Surfaces 2 and 3 are streamlines. Velocity p...
The figure (not to scale) shows a control volume to estimate the forces on the airfoil with elliptic cross-section. Surfaces 2 and 3 are streamlines. Velocity p...
Total Unique Visitors
Loading......