Aerospace Engineering > GATE 2021 > Beam Deflection
Two cantilever beams AB and DC are in contact with each other at their free ends through a roller as shown in the figure. Both beams have a square cross-section of 50 mm x 50 mm, and the elastic modulus E = 70 GPa. If beam AB is subjected to a uniformly distributed load of 20 kN/m, then the compressive force experienced by the roller is _______ kN. (round off to one decimal place)
Correct : 2.2 to 2.6
Similar Questions
The deflection y of a certain beam of length l and uniform weight per unit length w, is given as y = (w/(48EI))(2x4 - 3lx3 + l3x), where x is the distance from...
An aircraft wing is idealized as a cantilever beam of constant width and length I with a tip mass of weight W (Newtons) and has a uniformly distributed loading...
A cantilever beam-spring system is shown in the figure. The beam is made with a material of Young's modulus 1×105N/mm2 and geometry such that its moment o...
Total Unique Visitors
Loading......