Aerospace Engineering > GATE 2015 > Torsion
The thin rectangular tube shown below is made of a material with shear modulus, G=80 GPa. The shear flow is calculated based on the mid-thickness dimensions. If the free end is allowed to twist no more than 0.0727 rad, then the maximum torque (in Nm) which the tube can be subjected to at its free end is
Correct : 990 to 1020
Similar Questions
The thickness of a uniform hollow circular shaft is equal to the difference between the outer radius and the inner radius. The ratio of the inner diameter to th...
A thin-walled tube, with the cross-section shown in the figure, is subjected to a torque of T = 1 kN-m. The walls have uniform thickness t = 1 mm and shear modu...
A solid circular shaft is designed to transmit a torque T with a factor of safety of 2. It is proposed to replace the solid shaft by a hollow shaft of the same...
Total Unique Visitors
Loading......