Aerospace Engineering > GATE 2014 > Beam Deflection
A 1.8m long steel beam of rectangular cross section (10mm× 6mm) is simply supported with a length of 1.2m between the supports and an overhang of 0.3m on either side. Young's modulus for the material of the beam is 200GPa. For a 50N load applied at the center of the beam, magnitude of the slopeof the beam at tip S is
Correct : 0.12 to 0.13
Similar Questions
The deflection y of a certain beam of length l and uniform weight per unit length w, is given as y = (w/(48EI))(2x4 - 3lx3 + l3x), where x is the distance from...
Two cantilever beams AB and DC are in contact with each other at their free ends through a roller as shown in the figure. Both beams have a square cross-section...
An aircraft wing is idealized as a cantilever beam of constant width and length I with a tip mass of weight W (Newtons) and has a uniformly distributed loading...
Total Unique Visitors
Loading......